PZHE quantitative disc feeder
PZHE disc feeder is a kind of disc feeding equipment in the material conveying and mixing system. It is suitable for metallurgy, building materials, chemical industry, light industry and other industries as well as mechanized casting workshops to continuo
working principle
The bulk materials in the silo fall onto the disk surface through the worm sleeve in the sleeve, and the drive device of the disk base drives the disk surface to rotate. The materials are distributed to the conveying machinery through the outlet of the sleeve's receiving groove to complete the feeding process. At the same time, the feeding amount can be adjusted by changing the rotating speed of the disc surface.
In the structure of the equipment, the rotation of the disk surface is realized by turning the external gear of the slewing bearing by the pinion on the output shaft of the reducer. The pinion is easy to separate from the external gear of the slewing bearing, and it is easy to remove the reducer for maintenance and replacement of the transmission device.
Performance parameter table
型号 |
粒度mm |
物料堆比重t/m3 |
含水量 |
圆盘直径mm |
生产能力t/h |
圆盘转速r/min |
变频电机功率KW |
配料秤带宽mm |
PZHE1600 |
0-80 |
0.5-2.5 |
通常≤8%,雨期≤13% |
1600 |
10-100 |
0.6-6 |
5.5-11 |
≤650 |
PZHE2000 |
2000 |
20-200 |
0.5-5 |
5.5-15 |
≤800 |
|||
PZHE2200 |
2200 |
25-250 |
0.5-5 |
5.5-15 |
≤800 |
|||
PZHE2500 |
2500 |
30-300 |
0.5-5 |
5.5-22 |
≤1000 |
|||
PZHE2800 |
2800 |
40-420 |
0.5-5 |
5.5-30 |
≤1200 |
|||
PZHE3000 |
3000 |
50-500 |
0.5-5 |
5.5-37 |
≤1200 |
|||
PZHE3200 |
3200 |
60-600 |
0.5-5 |
5.5-37 |
≤1400 |
|||
PZHE3600 |
3600 |
90-900 |
0.5-5 |
5.5-75 |
≤1600 |
1. The production capacity is based on the bulk density of 2.0t/m3. If the density changes, the feeding capacity can be calculated according to the density ratio.
2. The user can choose whether the disk is equipped with a lining plate, which type of lining plate is used, and whether the disk is equipped with a dust cover.